Unscrew the protective case and carefully take out the Aǹalemma wand. To treat regular water with the Aǹalemma wand, immerse the full length of the crystal vial and stir for approximately 1 minute per 35 oz (1 L) of water. Using this general formula, you can calculate the duration for any volume. For example, a regular glass of water (8 oz) should be stirred for approximately 15 seconds. After each use, wipe the Aǹalemma dry using any kind of clean cloth and place it back in its case.

For volumes of water greater than 10 gallons, our general formula will not be appropriate as there is a significant difference in surface area between the Aǹalemma wand and the body of water being treated. In this case, we suggest extending the formula to 1.5 minutes per 35 oz (1 L) to ensure that most of the water molecules come into contact with the wand.

The Aǹalemma Wand is a portable device designed to treat small amounts of water. However, we understand the need to use it for larger volumes. If you decide to do so, it’s crucial to use the device properly to avoid damaging it. Instead of manually treating large volumes of water, you can leave the wand to soak in the water for an extended period. Since there is no movement involved, it will take longer for all the molecules to reach the wand. It’s best to keep the wand submerged for as long as possible. However, make sure you don’t submerge the metal cap, as constant moisture may damage the binder that holds the cap attached to the vial and cause permanent harm to your wand.

Yes, Aǹalemma can be used with any kind of room-temperature drinkable liquid. The same applies to mineral water, spring water, filtered water, etc.

Yes, you can use Aǹalemma on any room-temperature drinkable liquid. As long as it contains water, Aǹalemma will have an effect on it. To keep the wand in mint condition, make sure to rinse it with warm water after this type of use to wash off any remaining organic particles.

We do not recommend immersing the Aǹalemma wand in any hot liquids as this can lead to breakage of the highly delicate crystal vial. However, you can still prepare your favorite tea or coffee by using pre-treated coherent water. This process will not have a permanent effect on the coherent state, so enjoy your hot beverage without any worries.

Yes, we recommend treating room-temperature water with the Aǹalemma wand and using it for cooking when needed.

Heating or freezing will not permanently affect the coherent state of Aǹalemma water. At temperatures above 149 degrees Fahrenheit (65 degrees Celsius), the coherent structure will be temporarily distorted due to natural fluctuations in water molecules’ behavior. However, our tests have confirmed that the coherent structure is efficiently restored when the water cools down.

Yes, this is more than recommended. Our research showed multiple benefits of Aǹalemma water on plant vitality, soil quality and the energy storage capacity of fruits. Additionally, our most recent study on basil plants indicated protective effects of Aǹalemma water on essential processes like respiration and photosynthesis even during drought.

Do not attempt to open the vial as this will make the wand unusable. Aǹalemma is designed solely for the purpose of creating coherent water. Water that has been treated with the Aǹalemma wand can be used in any way you require.

Aǹalemma is not a water filter. It affects the physical state of water but doesn’t change its chemical content. However, to further increase the quality of your drinking water, we recommend using Aǹalemma on pre-filtered water whenever possible.

The “mother water” is the full-spectrum coherent water that is filled into all Aǹalemma products. The mother water is created through a five-stage process that spans a period of one year. In brief, the water starts out as regular, clean water, purified from chemical and biological contamination. It then undergoes a physical procedure that resembles the natural movements and cycles of water in nature. Through this process, the mother water is brought into a highly ordered physical state that can be transferred to surrounding water molecules through direct physical exposure (such as stirring regular water with the Aǹalemma wand).

When you stir regular water with the Aǹalemma wand, the coherent configuration of the “mother water” contained inside the vial is successfully copied to surrounding water molecules. For this to work, the vial had to be designed in a specific way. During development, we tried out numerous materials before we found that quartz has a specific physical composition which allows a seamless transfer of energy between the inside and outside of the vial. This is the main reason the wand is so fragile – the vial had to be made ultra thin so it doesn’t disrupt the transference process.

As of yet, Aǹalemma water seems to hold its coherent state indefinitely. Our most recent testing was done on water that was treated 5 years prior, and it still held its coherent structure.

The direction of swirling does not influence the functionality of the Aǹalemma wand. We tested both the speed and the direction of swirling and neither parameter had influence on the coherent state.

Aǹalemma-treated water won’t make regular water coherent in the same way that “mother water” does. Once you combine regular and coherent water, you should restir the new body of water to ensure it is sufficiently treated. To do that, it’s best to follow our standard stirring formula. For example, if you add 35 oz (1 L) of regular water to your coherent water, you should stir for at least one more minute.

According to our testing, the “mother water” that is inside the Aǹalemma wands does not lose its coherent state with time. This water is extremely stable, holding its coherent state even after exposure to strong electromagnetic radiation (e.g. X-rays).

No. We tested the coherence of Aǹalemma-treated water when exposed to different sources of radiation, such as radiofrequency radiation (emitted by mobile phones, computers and similar electric devices), microwave radiation, visible light, UV and short-lasting X-ray radiation. Regardless of the type of radiation, exposure to different electromagnetic waves did not affect the coherence of Aǹalemma water.

Our main test is an indirect biological assay based on biophoton emission of germinating plant seeds. Our early research showed that coherent water will produce a specific biophoton emission curve that differs from a curve produced by regular water. Since Aǹalemma water was originally created as a side-product of biophoton research, this remains our most reliable indirect assay for quickly measuring the changes in water.

Biophoton emission is tested using highly sensitive charge-coupled cameras. For our standardized tests, we are analyzing the biophoton emission curves produced by plant seeds during germination. Seed germination requires only water and light, so by keeping the light exactly the same, and changing only the water, we can assess the changes in the water by measuring the difference in metabolic activity of the seeds. It’s important to note that water coherence is part of an emerging scientific field, and there are currently no standardized tests for directly measuring the coherence of water using conventional technology. We used various tests to measure the size of coherent domains in Aǹalemma water, such as Raman, UV/VIS and NIR spectroscopy (also known as aquaphotomics), and temperature perturbations. However, these tests did not offer a sufficient level of reproducibility to be used for QA.

The main difference between Aǹalemma water and other “structured” waters is its stability. Most structured waters lose their structure within 5 minutes to a couple of hours after treatment. Aǹalemma water holds its stability for years, even after a single treatment.

Both versions contain the exact same wand – the difference is only in the material of the protective case. Please note that while the walnut version might provide a slightly better grip, neither version of the protective case will protect the Aǹalemma wand from breaking if dropped.

When not in use, the Aǹalemma wand should be stored inside its protective case. To keep the wand clean, dry it with a clean cloth or kitchen towel after each use. The crystal vial of the Aǹalemma wand is highly fragile – to prevent breakage, keep it in a secure spot outside the reach of children and pets. Store the wand at room temperature.

You can store coherent water in any type of container you would normally use. We tested all the most commonly used materials (glass, plastic, steel, copper, clay) and found no difference in the coherent structure.

Yes! To test the resistance of Aǹalemma water to external forces, we exposed it to different types of radiation, including X-rays. We found no evidence of external influences having a destabilizing effect on Aǹalemma Water contained inside the vial. Exposure to radiation had no effect on Aǹalemma-treated water either.

We generally recommend placing the Aǹalemma Wand in your check-in luggage, instead of a carry-on. The Aǹalemma Wand contains liquid, and since this is not a standard household item, airport personnel might categorize it as a type of device/liquid not allowed on a plane. Although many of our customers had successfully brought their Aǹalemma wands on planes in their carry-ons, if you have the option of placing it in your check-in luggage, we would always recommend that first.

The Aǹalemma wand is fragile – to protect it from breaking, we recommend storing the wand in its original box (with the safety foam inside) and placing it between soft items such as bundles of clothing. This will help absorb any impacts that might occur during luggage handling and transportation.

To ensure your wand stays in excellent condition for many years, it’s important to use and store it correctly. After using the wand on regular water, dry it with a clean cloth before putting it back into its protective case. If you’re using the wand on juices or similar beverages, we recommend rinsing it with cold or lukewarm water to remove any organic particles. If necessary, you can wash it with a gentle natural soap, but a quick rinse after use should suffice.

In order for the wand to work, the quartz crystal of the vial had to be made ultra thin. This is what allows us to provide you with the tool to create unlimited amounts of coherent water, but it also makes the wand very fragile. Dropping the wand from any distance will almost certainly cause it to break. To keep your wand intact, apply extra care when using it and in the meantime, store it in a secure location away from pets and small children.